The management platform audio and lighting devices, WorkCAD 3, the sound receiver BLR 2, the DD 4 interface converter and AC 1 Control BL are some of the solutions that can be seen in its stand.

Punctual to his appointment, Work Prowhose products distributed Equipson, it has come to ISE 2017para present their most important innovations this year have focused on the WorkCAD 3 software, the audio receiver BLR 2, the DD 4 interface converter and AC 1 BL control.

WorkCAD 3 is the evolution of the control software for audio and lighting. Under this platform all devices that can be controlled through different protocols, from OSC to integrate RS232.

Thanks to its power, the user has complete flexibility to configure their own interface, either a simple layout to control three channels of DMX control or a powerful audio matrix processor, equalization, dynamics, etc.

Due to the wide variety of protocols that are already on the platform, not only can control our devices, but is also able to control others who connect to the local area network via UDP or TCP, connected to the port RS232 , etc.

BLR 2 is a receptor channel stereo audio and two unbalanced outputs incorporating therein a DSP to equalize in 8-band audio signal, set the crossover, limiter or delay.

Both 2 and BLS BLR 2, for its modularity, can be located anywhere in the installation. For this they have different auxiliary fasteners. Puedns be fed through both PoE and its auxiliary input 12 / 24V DC.

DD 4 is a converter that can convert both analog input signal to the Dante protocol and vice versa, increasing the versatility of an installation in which different protocols combine audio control.

This device further comprises a converter 24 bit resolution and 96 kHz sampling, resulting in high quality sound. In addition, thanks to its small and compact size, the device offers the possibility of being located in any space, maximizing installation.

Finally, BL AC 1 is the evolution of LM GPIO has been expanded to offer features and solutions that provide maximum installation versatility thanks to its three-way control: 2 RS485, 2 RS232 and 2 Ethernet.

Its format 1HU 19 "rack allows easy integration into fixed installations and 16 GPI optoaclopadores and 6 open collector outputs for IR control mean that it can be controlled through WorkCAD 3 and the OSC protocol, providing greater compatibility and control .

Special access to ISE 2017


Be Sociable, Share!

Did you like this article?

Subscribe to our RSS feed and you will not miss anything.

Other articles on , ,
By • 10 Feb, 2017
• Section: Audio, Control, Display, Events, Lighting

game of thrones slot review http://gameofthronesslotgame.com/