With the installation of a single decoder located at a central site, it is possible to transmit the signal by a CAT5e / 5 cable to one or more screens at a distance of up to 120 meters, and can also be used in combination with the LAN, including routers and switches.
All products of MegaView Marmitek, Dutch company intelligent audio and video solutions recently acquired by Vogel's (additional information at) Digital AV), Consist with an HDMI transmitter and an HDMI receiver, so it is now possible to connect several additional receivers (available separately through Vogel's) with a single HDMI transmitter.
Marmitek MegaView 90, which supports up to 1080p Full HD, also works on local network, including routers and switches, and multiple receivers can be connected to the same network at the same time. For example, a decoder signal can be transmitted by a cable CAT 5e / 6 to one or more screens, televisions and projectors at a distance of up to 120 meters.
With the switch HDMI Matrix Connect 540 UHD, compatible with 4K, you can connect two screens, TV or projector and switch the signal between four HDMI devices connected, which is a very suitable solution for presentations or distribution signal to another room .
HDMI Matrix Selector provides the ability to play content from different HDMI devices on two screens independently as it supports UHD-4K Full HD 1080p, 3D, while audio does with most popular market, including Dolby TrueHD and DTS-HD Master Audio, choosing the most appropriate resolution on the HDMI output with single switch Edid.
This system, with anti-interference casing metal, incorporates repeater and equalizer for correcting a signal loss plus receiver independent IR to control the selector.
Did you like this article?
Subscribe to our RSS feed and you will not miss anything.