SeeSound distributes lighting projectors for ECLCYC Prolights scenarios

Designed to work on the front of the stage as a filler light, as 'lamps' and in the cyclorama for backlight, This range is available in two models: ECLCYC050 and ECLCYC100.

SeeSound distributes the ECLCYC line of solutions from Prolight, Composed of ECLCYC050 and ECLCYC100 models. These are solutions designed to work on the front of the stage as a filler light, Like 'lamps', as well as in the cyclorama for backlight.

The ECLCYC has been designed with an innovative asymmetrical optical system, which allows these to work optimally at the front of the stage as floor projectors (Footlights), as well as at the back of the stage as a cyclorama light (CYC).

They are endowed with mechanical engineering that makes them immune to problems, allowing for easy installation and handling.

To achieve the ideal lighting for a cyclorama or wall, The fixtures should be installed at a distance of one to three meters from the bottom to be illuminated. They can be attached to each other or spaced up to three meters securely apart, Connecting the units in a chain, in one or two rows (both hanging and on the floor).

ECLCYCs emit a high-quality white light, no matter the distance. Both devices achieve CRIs higher than 92 with the R9 level of red on a 92Ra and with TLCI for cameras up to 92.1.

The ECLCYC has an RGB LED source in its design, plus a fourth warm white diode, that allows you to generate any shade of white from 2.800 up to 6,500°K, with green and magenta correction. In addition to the full range of whites, ECLCYCs are also capable of delivering vivid colors, which can range from deeply saturated, to soft pastel shades achieved through RGB color mixing, with macros and virtual CTO color corrections.

ECLCYCs are very compact, small in size and with 11 cm height, can be discreetly placed anywhere, even on the proscenium floor, in floor backlighting or even on walkways and Photocalls.

Despite being a color-based LED source, ECLCYCs have exceptional light output power, becoming one of the brightest LED fixtures in its category. And this while remaining environmentally friendly with an efficiency of 80 Lumen/Watt, Considerable energy savings, compared to other traditional landscapes and responsible consumption.

ECLCYCs have been designed to be easy and intuitive to use. They are equipped with a graphic display and can be controlled in a DMX network, via physical DMX RDM, ArtNet or Wireless DMX.

The ECLCYC can be mounted on the floor or hung using the omega bindings compatible with the standard claws on the market. To increase your versatility of the ECLCYC, There is an accessory with the bells to orient the device with poles, widely used on TV sets (Pole Operated).

Other articles on Prolights, SeeSound