Equipson, company dedicated to the audio and professional lighting sector, has launched the Zenith 6000 of the Work brand, a switched source power stage that offers a high degree of signal integration and high output power levels in a range of lightweight amplifiers.

Equipson has added a new model to the Zenith series of Stages of Work, that offers more power, with ranges up to 6000W on bridge @4 Ohm. The construction of electronics, in which all the details have been taken care of, makes that with its reduced weight (only 14,6 Kg), the Zenith 6000 is especially suitable for Touring applications.

La gran relación coste/W de toda la serie Zenith también es una característica en este modelo que, In addition, incorporates microcontroller stabilized switched power supply, allowing to supply a continuous power of up to 8 Kw; power supply design with high curly current capacitors, improves performance at low frequencies with more performance and reliability; electronic circuit manufactured with SMD technology components, improving construction reliability and much more reliable automatic testing; operating mode selector: Stereo, Bridge and Parallel; input sensitivity selector: 26 dB/32 dB; optimal operation at 2Ω load levels; and short circuit protections at the outlet, over-temperature, DC and very high frequency signal, even on a continuous basis.

Zenith technical data 6000
– Power 8 stereo Ω: 1200 W x 2.
– Power 4 stereo Ω: 2000 W x 2.
– Power 2 stereo Ω: 3000 W x 2.
– Power 8 Ω bridge: 4100 W.
– Power 4 Ω bridge: 6200 W.
– Power 8 parallel Ω (monkey): 1200 W.
– Frequency response: 20 Hz – 20 khz.
– THD+N: 0,01%.
– Factor damping: 200.
– Dynamic range: 80 Db.
– S/N ratio: 100 Db.
– Output circuitry : 10 unbalanced kΩ. 20 kΩ balanced,
– feeding: AC 220 V, 50 hz.
– dimensions (An x Al x Pr): 483 X 88 X 505 Mm.
– weight: 14,3 Kg.


You liked this article?

Subscribe to our RSS feed And you won't miss anything.

Other articles on
by • 2 May, 2012
• section: audio