The new 1T-CT-690 system that Tv One will present in Amsterdam allows you to establish a transmission of HDMI signals at distances of up to twenty meters, both in point-to-point or in broadcast mode, carrying the signals from one transmitter to several receivers..

On the occasion of the celebration of ISE'10 Amsterdam, Tv One will present the 1T-CT-690 HDMI wireless transmission system. This solution, composed by the issuer (1T-CT-691) and the receiver (1T-CT-692), allows transmitting 1080p HDMI signals in addition to embedded or lossless audio and supports VGA and SVGA at 60/72Hz and XGA at 60/70Hz as well as HDTV resolutions (even 1080p without compression). In terms of color space, it supports RGB 24 Bit 444 reaching a signal sending coverage of up to 20 meters with a cadence of less than 1 ms and a data rate of 1.5Gps. The system can work in two modes: unicast y broadcast. The first allows establishing a point to point while in the second, several receivers are powered from a single transmitter.. Complying with HDCP requirements, The system uses an AEC encryption algorithm of 256 bit. EDUD and CEC options are available in unicast mode, and also works with a standard infrared remote control. Includes an infrared Blaster capable of controlling all devices connected to the 1T-CT-691 transmitter from any of the receivers. Finally, note that both transmitter and receiver come equipped with a connector blocker, preventing accidental disconnection of any of the connected devices..

Features

  • HDTV resolutions up to 1080p, 24fps/30fps
  • 1080p distribution 20 RGB meters 24 bits 4:4:4
  • VGA and SVGA RGB input (60/72), XGA (60/70)
  • Compatible con HDMI v1.2 Lossless Audio Digital
  • Compliant with HDMI v1.2, HDCP 1.1
  • Supports HDTV I/O up to 1080p
  • Encryption 256 video bits
  • IR Blaster for remote control of other devices
  • Connector lock +5 VDC
By, 22 Jan, 2010, Section: Signal distribution

Other articles about ,

Did you like this article?

Subscribe to our NEWSLETTER and you won't miss anything.