Work Pro acude a ISE 2016 with its latest audio solutions for installations

Smart Series Ceiling Speakers, digital mixer 8 MD channels 82 AX, WFS speakers 10 CX y WPS 310, as well as PA amplifiers 1254, PA 100 y PA 100 MX are some of the novelties with which Work Pro has attended the fair that is being held in Amsterdam these days, Integrated Systems Europe 2016.

like every year, Work Pro, participate in WHEREAS, one of the most important international fairs in the events sector, installation and production, with the aim of presenting new and improved solutions, developed during the last year by the brand, which distributes in Spain Equipson.

And su stand (Hall 7 Stand M-190), Visitors can find, among other novelties, the new series of Smart Series ceiling speakers that offer three different models and a common feature that allows a series connection of 3 passive speakers, expanding a facility up to 4 in total.

The SCPro 4A integrates a 2-channel amplifier×15 W, monitor output and bridge and dual mode; while the SCPro 4BT offers the same specifications, also incorporating Bluetooth connectivity. For your part, elSCPro 4BL integrates a Blueline receiver, 2x5W amplification, PoE power, remote control (BLC1) and bridge and dual mode.

All three models can amplify three passive devices connected in series (two to one channel and the other remaining one that will be on the same as the amplifier, 2 in L and 2 an R), offering a solution for larger installations.

Work Pro is also introducing the digital mixer 8 canales (balanced inputs) MD 82 AX, that incorporates advanced functions such as Automixe, which allows mixing the value of the signal depending on the level of another) and the interface for external RS commands 485. Other notable features are the three tone controls, High-pass and low-pass filter with frequency adjustment and anti-feedback control 4 levels, that allow you to optimize the installation and provide it with multiple control and management capabilities. All inputs have a switch for connecting a microphone with phantom power. + 48V.

Visitors can also discover the new WFS 10 CX, a speaker designed for outdoors, with IP protection grade 5 (It is made of fiberglass), with a sensitivity of 104 dB and power 300 W continuous, thanks to its coaxial speaker 10 inches and 1 inch compression driver, being ideal for installation in outdoor areas, such as stadiums or amusement parks, since it also incorporates two types of connectivity (8Oh y 100V) allowing various installation options.

Another product presented at ISE is WPS 310, pendant speaker, which mounts a coaxial transducer 10 inches + 1 inch and provides technical characteristics such as a power of 500W @ 8Ω. A device designed to be installed in venues such as bars or hotels where both style and quality are desired..

Regarding the section referring to amplification, Work Pro is announcing several new features, like the amplifier 4 canales (19”) PA 1254, which offers 150W per channel and can be configured with up to 9 presets of which, they can be like 1 (3/4 bridged), 2 stereo, 3 (2.1) y 4 independent channels. In the mode 2.1 You can configure the low-pass filter for the subwoofer and the outputs to the satellites, thanks to the high-pass filters it incorporates.

Another new feature is the PA amplifiers. 100 y PA 100 MX, some small devices that offer a power of 100W and the possibility of working under the RS protocol 485 can be controlled remotely. The PA model 100 MX also incorporates anti-feedback, auto-gain or selector between mono/stereo or impedance (8/16Oh – 70/100V).