Klipsch completes its Reference Premiere subwoofer line

Four new models have been added to the line of subwoofers from Klipsch. They achieve an optimal balance between amplification, controller capacity and cabinet volume, having large drivers, able to get off the 20 Hz.

Magnetron The Spanish market has launched the new subwoofers from the North American brand Klipsch. Four bass speakers that complete the line Reference Premiere and that combine with the rest of the products in the range.

The four models are named under different numbers., RP-1000SW, RP-1200SW, RP-1400SW y RP-1600SW, that have to do with the size of the drivers they present. So, the first of them has a driver 10 inches and 300W of power; the second, one of 12 inches and 400W of power; the third, of 14 inches and power 500 W; and the fourth, of 16 y 800 W.

They all have the same design, Made with a scratch-resistant ebony vinyl finish. Besides, They have rounded corners to soften the lines, rubber feet for cushioning, grille posts made of steel and a woven fabric grille that offer a premium image.

Each of these subwoofers has been manufactured to achieve an optimal balance between amplification, controller capacity and cabinet volume. In this way, all offer the lowest possible bass extension with maximum performance, along with speed and without sacrificing precision, being able to go down even beyond the 20 Hz.

All four are equipped with a front-activated driver with a slot-shaped bass reflex port on the front.. This system provides additional low frequency extension, as well as greater placement flexibility by having the port in the front instead of the rear.

In the same way, Klipsch has used woofers Cerametallic, which have been redesigned in order to obtain more power and better performance. Even, has incorporated an analog preamplification stage combined with a Class D power amplifier.

Preamplifier maintains signal path for more accurate reproduction, while the Class D amplifier provides clean maximum output at the lowest frequencies. Patented internal geometry with a new Aerofoil slot port design minimizes port noise for clean, distortion-free low frequencies.

Wireless connection

Los subwoofers RP-1000SW, RP-1200SW, RP-1400SW and RP-1600SW are characterized by incorporating a wireless connection port that is compatible with the kit. Klipsch WA-2 wireless subwoofer.

This kit includes a subwoofer receiver and a transmitter that connects to the subwoofer/LFE output of a compatible amplifier or AVR. Besides, allows you to connect up to four subwoofers using a single transmitter.

They have gain controls, low pass crossover and phase on the rear, easily visible and accessible and offer the possibility of using the two wireless inputs RCA and WA-2 simultaneously, so it is possible to connect both the line and the wireless inputs and leave them connected at the same time.

This translates into being able to use the subwoofer with two systems at the same time., if necessary, without having to unplug it from one system to connect it to the other (as long as they are both in the same room). To all of the above, All four add an energy efficient standby mode so they consume very little power.