Led&Go will exhibit at ISE 2026 are mupi Led Full exterior para DOOH

The audiovisual integrator Led&Go will show during its participation in the Barcelona event the advantages that its LED mupi offers in outdoor environments, with COB technology, a brightness level of up to 4.000 nits and IP66 rating.

The outdoor digital signage is going through a stage of clear technological consolidation. As pointed out by the integrator Led&Go, the evolution of LED in resolution, uniformity, brightness control and reliability has reached a point of visual convergence which places it at the level - and even above- of historically dominant solutions in urban furniture.

Added to this maturity are decisive structural advantages for outdoors.: mayor brightness, absence of reflections and a architecture designed to operate 24/7, with high reliability, stability and ease of maintenance.

Based on these characteristics, Led&Go will present during his participation in WHEREAS 2026, of the 3 al 6 February in Barcelona, in the space of NovaStar (pavilion 3 – estand C100), and giver / tótem Led Full Outdoor for use in DOOH networks and urban environments.

As pointed out Jorge Hurtado, commercial director of Led&Go, “Led has reached a maturity that changes the focus outdoors. Today we are not just talking about image quality, but of efficiency, reliability and continuous operation. The mupi that we will show at ISE 2026 It is a good example of how LED has become a solid infrastructure for DOOH”.

Operational efficiency

The market trend is clear: In outdoor and DOOH applications, only the visual impact is no longer evaluated, but the total operating cost (opex). Continuity of service, low energy consumption, Thermal management and maintenance are today key factors of profitability.

The exterior Led mupi&Go responds to this reality with a technological infrastructure approach, that incorporates:

• High visibility in full sunlight, with brightness levels up to 4.000 nits.
• IP66 rating to operate in demanding environmental conditions.
• COB Led Technology (chip on board), with resin protection that improves uniformity and reinforces durability for intensive use.
• Fast modular maintenance, with module replacement by a single operator, significantly reducing downtime.
• Remote monitoring, automatic brightness sensorization and control, essential for large-scale DOOH networks.
• Settings double sided, that expands visual impact and versatility in high-traffic locations.
• rear of dynamic light using personalized canvas.

In energy terms, The architecture of this outdoor Led mupi allows a consumption reduction between the 26 and the 28% in double-sided configurations.

As they point out from Led&Go, The maturity of the LED goes beyond the panel. The joint advance in processed, control, calibration and remote operation has accelerated its adoption in urban digital signage, aligning with the demands of smart city projects and distributed advertising networks.

This point of technological convergence today allows compared to traditional outdoor solutions, with a key structural advantage: robustness and useful life adapted to the real exploitation cycle.

In addition to the demonstration of its operation that Led&Go will be performed at ISE 2026, This type of outdoor LED mupi already operates in real environments, with deployments at scale. An example is the facilities in IP stations in Portugal, with almost a hundred units in operation.