In the last two projects he has used 14 Work Pro's 400W SN8 in one of them and 18 teams in the other. The key to their choice was their ability to offer good dispersion, clear, accurate audio as well as 100V line connectivity and low impedance.

VideoCentric uses Work Pro SoundNut

The UK integrator VideoCentric has used the speakers of the SoundNut SN8 range of 400W of Work Pro, brand that distributes in Spain Equipson, for two projects. In one is used 14 teams and in the other 18.

VideoCentric uses Work Pro SoundNutVideoCentric's technical team evaluated the SN8 speakers prior to use and agreed that they met the requirements for both projects.. These included characteristics such as voice intelligibility and musical clarity., particularly in acoustically difficult environments where high ceilings created reverberant sound fields.

Key to choosing VideoCentric was SoundNut's ability to deliver good dispersion, clear, accurate audio as well as 100V line connectivity and low impedance.

The company also needed the audio to work in multiple zones of large multi-purpose/configurable spaces and have a modern and attractive design that worked discreetly against black and white ceilings..

VideoCentric uses Work Pro SoundNut

“The SN8s were easy to install safely on site. A simple four-conductor cable with a few simple installation instructions. The unit itself was of high quality with an easily removable grille to ensure the logo is in the right place., and very resistant”, comments Andy Worn, VideoCentric Senior Installation Engineer.

For the installation you required 18 Speakers, VideoCentric powered the system using a Work Pro PA 4150L amplifier. Used 6 SN8 speakers in a separate area and these were powered by a Work Pro PA 2120L amplifier.

VideoCentric uses Work Pro SoundNut

In the other installation of the 12 SN8 speakers, VideoCentric used a Work Pro PA 4150L amplifier to power the speakers in three separate rooms. Two channels were used for the main room, what you have 8 Speakers, and a single channel for the others 2 Areas, with 2 and 4 speakers respectively.

The SoundNut range includes four speaker models: the 500W SN10, the 400W SN8, the 250W SN6 and 60W SN3. Its coaxial speakers are 10, 8, 6 and 3 inches respectively. Also includes the SN8 Sub 1000w, a subwoofer of 8 inches that can be incorporated into any system when low frequencies need to be improved.


You liked this article?

Subscribe to our RSS feed And you won't miss anything.

Other articles on , ,
by • 26 sea, 2020
• section: audio, Case studies