Audio-Technica Serie 3000: Dante-compatible wireless solution

The wireless microphone system Audio-Technica Serie 3000 Digital is characterized by a processing of 24 bits a 48 kHz, a dynamic range of 120 dB and a tuning range of 60 MHz.

Audio-Technica has expanded its line of wireless solutions with the Serie 3000 Digital, what's one in the series 3000 original UHF based.

This solution is characterized by a processing of 24 bits a 48 kHz, a wide dynamic range of 120 dB and a tuning range of 60 MHz. This ensures optimal audio performance and flexibility, with balanced analog audio outputs with a latency of 2,5 ms.

The Series Receiver 3000 Digital is enabled to integrate directly into a Dante network. Up to five dual-channel receivers can be connected ATW-DR3120DAN that allow feeding up to 10 wireless channels with a single pair of antennas, reducing rack space required and minimizing cost.

System control is carried out through monitoring software that allows access to frequency coordination, to cargo status and log information.

The Series 3000 Digital is also compatible with IP touch panel interfaces from AMX y Crestron, allowing perfect integration with installed audiovisual systems.

The Series 3000 Digital also includes different security features. Using a four-digit code as a common encryption key for the PIN code, only the computer's microphone and receiver can communicate, while an AES-256 setting (Advanced Encryption Standard) protects audio signals from possible eavesdropping and leaks.

Regarding the transmitters, The ATW-DT3102 handheld transmitter is equipped with a standard thread for use with Audio-Technica interchangeable microphone capsules, including those from the Artist Elite range, as well as other compatible options.

A single multifunction button on the body of the transmitter allows switching to a backup frequency on both the transmitter and receiver, if interference occurs, and be able to guarantee uninterrupted transmission.

In addition to the handheld transmitter option, The pocket ATW-DT3101 is also available, with a four-pin locking connector and a high-pass filter of 80/120/160 Hz. This has the same button as the ATW-DT3102.