Robe unveils its most innovative LED luminaires for shows and entertainment

The T1 Wash system and the T1 Profile FollowSpot are two of the latest innovations that Robe has presented at the German fair; while in its architectural branch the Led Eminere bars stand out.

Robe has unveiled its most innovative lighting solutions that focus on the latest additions to the T1 range.

The T1 Wash, in its fresnel and PC lens versions, It shares its MSL Led light source with its brother, the T1 Profile. (luz multiespectral) which provides an output that reaches the 10.000 lumens.

Among its functions also stands out a CRI 90+, CMY color mixing system, RGB o RGBAL, Plus y Minus Green, variable color temperature from 2,700K to 8,000K, virtual color wheel with 237 pre-programmed colors, beam edge color corrector, zoom the 7 of 50º, module with four blades that are individually controlled and rotates +-90º, Beam Shaper, sistema the dimmer L3 (linearity in low light) offering imperceptible dimming for a smooth fade out, Graduated Scrim system with a 180º rotation, 2 frost, soft and medium; Cpulse Flicker free system for HD and UHD cameras, and the sealed effect that prevents smoke or dust from entering the interior of the equipment and adhering to optical elements such as gobos and lenses.

All these characteristics make this equipment an essential element for theater and television..

Expanding the T1 range, The T1 Profile FollowSpot boasts the same functions as the T1 Profile, also incorporating a digital camera and can be connected to the BaseStation to work as a followspot.

The water proof version of the MegaPointe, the iPointe, shares all its virtues with a 310W and IP65 Osram Sirius HRI lamp.

El SilverScan, honoring Robe's silver anniversary, represents a Viva CMY in the body of a Scan. The elements that vary are the degrees of Pan movement (180º) y Tilt (55º), zoom range (9º-27º) y el output (9.020 lumens).

The architectural branch of Robe has standardized its product catalog with several additions such as the Eminere 1, 2, 3 y 4. These are LED bars for both architectural and entertainment use.. They feature the 18-bit Robe color mix, IP67, a variety of lenses (Symmetrical: 7/9/15/30/40/60 y 100º; Bi-Sometricia: 10×30, 10×60, 35×75, 10×90 degrees and Wallwasher), Individual RGBW or RGBA chips as standard and various sizes (30, 60, 90 y 120 cm, respectively).

With a beam angle of 6º and its 72 High power RGBW individual chips, the divine 72 It has the ability to illuminate a distance of up to 120m at a constant flux, and is ideal for architectural installations, industrial, artistic and entertainment.

It should be noted, in addition, the new coating technology that the Spiider lenses will include, tarantula, LEDBeam 150, ParFect 150 it's iParFect 150, which protects soft plastic lenses against surface scattering, offering countless benefits including longer intervals between cleanings, bright lenses without scratches and marks, and higher light output.

The future of professional lighting

All these Robe equipment, firm represented in Spain by Entertainment Equipment Supplies (EES), were presented in the last edition of Prolight+Sound, which was held in Frankfurt at the beginning of April. Robe took advantage of his attendance to commemorate his 25 years of history with a great stand and a dynamic show as a stage.

Other EES represented brands also attended this fair to exhibit their lighting proposals for the entertainment sector..

Vari-Lite took advantage of their attendance to present their new high-power wash VL6500. This has a discharge lamp 1.500 W, and saw the same format as the VL6000 but with CMY-CTO, using the same color curtain technology of the VL5 but dedicated to Frost curtains located in the front part of the head that give it an angle of 6 a 30 degrees.

And el stand de Prolyte A wide variety of new features could be seen, among which the new Verto H40V and H40R stand out., based on the trusses of the same name and sharing their load capacity with them, incorporating the Verto coupling system.

The Box Corner 40R HD offers greater robustness and versatility than traditional cube-type corners, being valid for both the series 40 like Verto 40.

The new H40V MB and S52SV MB truss models feature an additional tube and have been designed for the suspension of LED screens, and allow the total load to be kept in the center of the truss section, avoiding unbalanced loads.

For your part, the new Sleeve Block for the HT tower is a completely bolted structural element, resulting stronger and more precise than conventional welded versions. Compared to the current MPT Sleeve Block, It is reduced in size and has the same measurements as the Box Corner H40V. It has four threaded holes for the eyebolts that allow the GuyWire to be placed to stabilize, accessory integrated into the Sleeve Block.

Finally, The Ground Anchor is a new Prolyte anchoring system that is small in size and easy to install., which saves a large amount of ballast or counterweights in temporary removable structures, facilitating assembly and reducing transport volumes.

He standing by A week has been starring two new variants of the Titan Tube: Helios, that reduces the size, the pixels (8) and the power (36W) of the Titan Tube in half; e Hyperion, which is still in the prototype phase. This one offers double the size, pixels (32) and power (144 W, 5.800 lumens), combining the three versions in terms of color and brightness.

Also worth highlighting are the new accessories incorporated into the Astera catalog.: Dome for the AX5; Light Ball for the AX3, polyethylene sphere available in three sizes (30, 40 y 50 cm in diameter); and the Cross Plate for the AX1 and the Titan Tube, which makes it possible to place four units on wing plates at the same time.

For your part, at the company Luminex seeks to revolutionize intelligent control systems with its new range of LumiNode converters, which not only converts ArtNet signal to DMX, but rather the converter concept evolves to become a processor that allows processing incoming lighting data.

Stage Smarts has developed the C24, a new distribution rack 24 direct x 16A, with A-Type 30mA RCBO protection and a 63A four-pole breaker. It shares with its older brothers outstanding functionalities such as immediate disconnection if the neutral is lost or the possibility of monitoring and setup through an external Server Box.

Finally, Quantum has launched its Burstberry, a compact laser display system 2.000 mw, with built-in burst effect and white LED light 3 watts. It is designed to work as a multi-head laser system and can be assembled into virtually any geometric shape..

As already mentioned Digital AV Magazine, Robert Juliat also went to Frankfurt to celebrate its centenary and present the new Charles 960SX range.